Other Products - Acoustic Sheet & Roll

Composites

BARYMAT BM-1C

BARYMAT BM-1C is an extremely versatile noise control composite. It consists of (from the top down) a clear, tough, polyester cover for contamination and weather (inc’l. UV) resistance, a loaded, flexible, 1.6 lb. per sq. ft. barrier for transmission loss (.8 lb. also available) and a .25 in. urethane foam decoupler.

BARYMAT BM-1C is very effective as an acoustic lagging to reduce breakout noise in pipes and ducts and can be used to increase transmission loss in walls and ceilings.

Uses

  • Pipe / Duct Wrap
  • High TL Walls & Ceilings
  • Lagging for Machinery Housings

BARYMAT BM-1C is easy to apply and is cut with common utility knives.
For secure and permanent installations use reinforced duct type tape, mechanical
fasteners or specified adhesive

Thickness and Standard Dimensions

BM-1C: Approx. .3125 in. – overall composite thickness
Sheets: 54” wide X 72”, untrimmed (27 sq. ft.)
Rolls: 54” wide X 30’ , untrimmed (135 sq. ft.)

 

BARYMAT BV-14C

BARYMAT BV-14C is a composite noise barrier / absorption material protected with a perforated vinyl film facing. The composite consists of (from top down) perforated vinyl for scuff, wear and contamination resistance, 1.0 inch of acoustic polyurethane foam for sound absorption, a filled, flexible 1.6 lb. per sq. ft. barrier for transmission loss and a .25 inch poly-urethane foam decoupler layer. It is suitable for moderately dirty environments where it is not exposed to contaminants such as direct oil or water spray.

Uses

  • Noise Enclosure Liner
  • Engine Compartment Liner
  • Wall Barrier-Absorber

BARYMAT BV-14C is easy to apply and can be cut with common utility knives.
For secure and permanent installations use specified adhesive.

Thickness and Standard Dimensions

BV-14C: Approx. 1.25 in. – overall composite thickness.

Sheets: 54” wide X 72”, untrimmed (27 sq. ft.)

 

BARYMAT BTMM-14C

BARYMAT BTMM-14C is a versatile and durable noise barrier / absorption material. The composite consists of (from top down) a metallized mylar facing that has high contamination resistance and light reflectivity, 1.0 in. of acoustic urethane foam for sound absorption, a loaded, flexible 1.6 lb. per sq. ft. barrier for transmission loss and a .25 In. urethane foam decoupler. It is suitable for very dirty, wet or oily environments and can be exposed to direct spray.

Uses

  • Noise Enclosure Liner
  • Engine & Generator Compartments
  • Marine Applications

BARYMAT BTMM-14C is easy to apply and can be cut with common utility knives. For secure and permanent installations use specified adhesive.

Thickness and Standard Dimensions

BTMM-14C: Approx. 1.25 in. – overall composite thickness.

Sheets: 54” wide X 72”, untrimmed (27 sq. ft.)

 

BARYMAT M-100D

BARYMAT M-100D has a 1.0 lb. per sq. ft. barrier combined with a deep embossed vinyl ‘carpet-like’ wear surface and a 0.25 in. polyurethane foam spacer. It is designed for applications that require high sound transmission loss, good heat insulation and abrasion resistance. This floormat is easy to install and is suitable for permanent or semi-permanent installations.

Uses

  • Vehicle Floors and Fire Wall Barrier
  • Control Room Floors

BARYMAT M-100D is easy to apply and can be cut with common utility knives.
For secure and permanent installations use specified adhesive.

Thickness and Standard Dimensions

M-100D: 0.375 in. – overall composite thickness.

Sheets: 54” wide X 72”, untrimmed (27 sq. ft.)

Absorbers

Conasorb F

Conasorb F is a flexible polyester polyurethane foam specifically formulated to absorb airborne and random incidence noise, utilizing minimum weight and thickness.

Conasorb F has a service life greater than that of polyether foams.
The manufacturing control of the cellular structure ensures the optimum ratio of open and closed cells for maximum performance. Conasorb F reduces airborne sound energy in the frequency ranges found in most environments.

Uses

  • Enclosure liner
  • Acoustic baffles
  • Silencer liner

Conasorb F is easy to apply and can be cut with common utility knives.
For secure and permanent installations use specified adhesives.

Thickness and Standard Dimensions

F-50: 0.5 in. thick, F-100: 1.0 in., F-200: 2.0 in.

Sheets: 60” wide X 72”, untrimmed (30 sq. ft.)
Rolls: 60” wide rolls (F-50 and F-100 only)
*CUSTOM TRIMMING AND DIE CUTTING CAN BE PROVIDED

 

Conasorb UF

CONASORB UF is a combination of a 1.5 mil. urethane film bonded to a polyester polyurethane acoustic foam. The black urethane film finish is extremely durable due to its highly elastic properties and is resistant to mechanical damage. This finish is suitable for very dirty environments and will withstand direct contact with water and most fluids found in industrial environments such as oils and cutting fluids.

Uses

  • Machine Guarding Liner
  • Engine Compartments
  • Enclosure and Silencer Liner

Conasorb UF is easy to apply and can be cut with common utility knives.
For secure and permanent installations use specified adhesive.

Thickness and Standard Dimensions

STANDARD DIMENSIONS
Sheets: 54” wide X 72”, untrimmed (27 sq. ft.)
Rolls: 54” wide rolls (UF-50 and UF-100 only)

 

Conasorb V

Conasorb V is a combination of a perforated vinyl film bonded to a polyester polyurethane foam. The perforated vinyl film provides a scuff and wear resistant surface that is suitable for dusty or moderately dirty environments where it is not exposed to contaminants such as direct oil or water spray.

Conasorb V is ideal as an enclosure or room surface absorber where a functionally attractive and cleanable surface is desired. The vinyl film surface is available standard beige, gray or black.

Uses

  • Enclosure Liner
  • Room Surface Absorber
  • Equipment Cab Liner
  • Silencer Liner

Conasorb V is easy to apply and can be cut with common utility knives.
For secure and permanent installations use specified adhesive.

Thickness and Standard Dimensions

V-50: 0.5 in. thick, V-100: 1.0 in., V-200: 2.0 in.

Sheets: 54” wide X 72”, untrimmed (27 sq. ft.)
Rolls: 54” wide rolls (V-50 and V-100 only)

Barriers

Barymat 5

BARYMAT 5 is a thin, dense, plain noise barrier material available in 1.0 lb. and 2.0 lb. per sq. ft. weights (0.5 lb. also available). This flexible, mineral filled sheeting can be applied alone or in combination with other acoustic products where high transmission loss is required.

Uses

  • Walls
  • Floors
  • Ceilings
  • Acoustic Wraps

BARYMAT 5 is easy to apply and can be cut with common utility knives.
For secure and permanent installations use specified adhesive

Thickness and Standard Dimensions

5 B-0B: .07” thick, 5 B-0D: .14”

Sheets: 54” wide X 72”, untrimmed
Rolls: 54” wide X 40’ rolls (5 B-0B only)

 

Acoustics West RB

Acoustics West RB is a ‘loaded’ PVC with a fiberglass scrim center making it an extremely durable and highly flexible acoustic barrier. This 1.0 lb. per sq. ft. material is an attractive light silver/grey in color. It is very easy to work with and readily accepts fittings such as grommets or Velcro, making it an excellent choice for curtains or acoustic over-wraps. The surface is easy to clean and contamination resistant, allowing it to be used in nearly any environment.

Uses

  • Curtain Barrier
  • Acoustic Wrap
  • Machine Guard Flaps (acoustic not protective)

Acoustics West RB is easy to apply and is cut with common utility knives.
Secure and permanent installations may include grommets, hook & loop and
mechanical fasteners or specified adhesive – available from Wilrep Ltd.

Thickness and Standard Dimensions

Acoustics West RB: Approx. .090 in. – .105 in. thick.

STANDARD DIMENSIONS
Rolls: 54” wide X 60’, trimmed (270 sq. ft.) – Part rolls available
Sheets: 54” wide X 72” , trimmed (27 sq. ft.)

 

Acoustics West Wildamp

Wildamp is a filled viscoelastic asphalt/polymer acoustical sheeting material designed for cost-effective vibration damping.

Wildamp has a pressure sensitive adhesive backing which is protected by an easily strippable liner. The permanent acrylic adhesive exhibits high tack resulting in 100% contact for maximum damping effectiveness.

Uses

  • Vehicle Body Panels
  • Ductwork, Heating, Ventilation and Air-Conditioning
  • Appliance Cabinets, i.e. dishwashers
  • Metal Office Furniture; lockers
  • Sinks and Bathtubs
  • Machine Housings; chutes and bins

Thickness and Standard Dimensions

Sheet Size = 29” X 32” (6.44 sq. ft. per sheet)
Sheet Thickness = .070” and .118”
Weight per sq. ft. = . 70 lbs. @ .070” , 1.16 lbs. @ .118”
Density = 110 lbs. / cu. ft., 1.8 g / cc
Color = Black
Adhesive = Permanent Acrylic
Material Type = Asphalt based

  • Oberst Loss Factor: .08 @ .070”, .12 @ .118”.
  • Performs well over wide frequency (63 – 4,000 Hz) and temperature range (-30° to 400° F / -34?° to 205? °C).
  • Excellent water resistance.
  • Solvents may leach small amounts of asphalt from material – but it will not be damaged.
  • Paintable – improves solvent resistance.
  • Flammability: Self extinguishing, Passes MVSS 302, ASTM D1692, UL 94HB.